Name: Benz SBC Tool W211/R230 ABS/SBC Tool
 
Description:
 
Mercedes-Benz W211 and R230 have ABS \ SBC system , if use DAS to test, it will show:
TIPS: CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT).
The above tips means internal fault of control unit, you have to replace the SBC control module, using W211 / R230 Tool, you can repair it easily without replace the new control module.
 
Mercedes-Benz's Safety Precautions had stated that before attempting to repair the brake system on its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control (SBC) system must be deactivated first using its Star-Diagnosis tester.

Deactivation of the SBC system is absolutely necessary before carrying out any maintenance work on the brakes like changing of pads, discs and fluids because the system is under a pressure of 140 bars. Mechanics who perform brake services on these car models must have the proper tools to avoid the risk of injuries to themselves and damage to the brake system.

After the repair had done, the SBC system can be activated and restore back its pressure. The
Error memory is erased automatically.

Quick, easy operations with LED indications.
Safe to use
Power on when plugged into vehicle's OBD-II diagnostic connector.
Light, compact and very convenient.
Stand alone unit.

This OBD SBC tool works on Mercedes Benz W211 (E-Class) and R230 (SL-Class) with SBC systems. It is ideally suited for:

Brake Centers
Independent Mercedes-Benz Workshops
Tire Service Centers
Service Garages
Quick Service Centers
Mercedes Benz Specialist Centers
Automotive Repair Workshops
 
Features:
 
Directly through the OBD-II repair SBC internal computer fault code C249F, no need to open ABS assembly, convenient and quick fix SBC completed within 10 seconds of data, a key to complete the operation.
SBC to repair the data first four models: 25%, 50%, 70%, 100%
 
Operation Steps:
 
1. Connect OBD Benz SBC Tool 16-pin end into the vehicle OBD-II communications socket;
 
2. Turn on ignition, then OBD Benz SBC Tool power LED will be on, and the device will give 2 beeps, it means the device is working properly;
 
3. According to your demands, choose the maintenance modes(25%, 50%, 75%, 100%), the BUSY LED will flash regularly during this process, and the device will give 4 beeps, it will finish recovery in about 10 seconds,  then the BUSY LED will be on and device keeps giving beeps.
 
Supported Types:
 
BOSCH NR: 0 265 960 012
BOSCH NR: 0 265 960 013
BOSCH NR: 0 265 960 015
BOSCH NR: 0 265 960 018
BOSCH NR: 0 265 960 019
BOSCH NR: 0 265 960 020
BOSCH NR: 0 265 960 023
BOSCH NR: 0 265 960 025
BOSCH NR: 0 265 960 028

Packing List:
 
OBD Benz SBC Tool
OBD-II Cable
Manual CD