Launch X431 CRP129E supports OBD2 ENG ABS SRS AT diagnostic and Oil/Brake/SAS/TMPS/ETS reset.
Launch X431 CRP129E is an evolutionary smart solution for passenger car diagnosis. It is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Once the tool and the vehicle are properly connected, the system starts auto-detect process. Once the whole process is successfully finished, a diagnostic report will be automatically generated and sent to your Email box (if bound).
If Auto-Detect failure occurs, manual diagnosis is also available. Diagnosis functions include: Version Information, Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes: Value, Graph and Merged).
1. Launch X431 CRP129E is an upgraded version of Launch CRP129 and Launch Creader VIII and supports more cars.
2. Fast VIN auto-detect. Launch CRP129E will read VIN information when you connect car.
3. Lifetime free update. Supports one-click update online via WiFi.
4. Automatically generate and upload diagnostic reports.
5. Support 5 reset functions: EPB/Oil/SAS/ ETS/TPMS reset
6. 8. 5 inch Android touch screen display with easy operation.
1. Diagnosis of Engine, ABS Airbag, SRS and Transmission System:
Engine System:
The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
Transmission:
It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
ABS System:
Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
SRS System:
SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.
2. All 10 Modes of OBD-II Functions for Repair Work:
This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
01 - Request Current Powertrain Diagnostic Data
02 - Request Powertrain Freeze Frame Data
03 - Request Emission-Related Diagnostic Trouble Codes
04 - Clear/Reset Emission-Related Diagnostic Information
05 - Request Oxygen Sensor Monitoring Test Results
06 - Request On-Board Monitoring Test Results for Specific Monitored Systems
07 - Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle
08 - Request Control of On-Board System Test or Component
09 - Request Vehicle Information
10 - Request Emission-Related Diagnostic Trouble Codes with Permanent Status
3. Special Functions:
Oil Service Light Reset
Allows you to perform reset maintenance mileage and data intervals for a new calculation of Engine Oil Life system once changed the oil.
EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system safety and efficiency when replace brake pad or motor
SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration
Electronic Throttle Position Reset
Vehicle throttle position system sensor connected to the butterfly spindle and is primarily used to monitor the throttle position within an inner combustion engine. Due to its location, the throttle position sensor is able to effectively observe where the throttle butterfly valve is positioned.
Tire Pressure System Reset
Service makes sense in displaying sensor IDs from the vehicle ECU, inputting TPMS sensor replacement IDs and testing sensors.
Note:
These special functions are NOT for all car models. If you are confused, please send your car brand, model and release year to me, I will check for you.
4. Battery Voltage Test:
5. 4 in1 Graphing Parameter:
It is better for you to compare the situation of the car, easy to know the problem of the car!
6. Live Data Stream Analyse in Graph:
Launch CRP129E can read and reset Engine, Transmission, ABS and SRS system, turn off the warning light related. Live data in graphing, record the live data stream for up to 10, simultaneous, PID's. Auto record diagnostic data, recorded data can be played back in text format and graph format. Playback supports two graphs (independent) or 4 PID's graphed.
7. Fast VIN Auto Detect:
It will read VIN information when you connect car, very easy to operate.
8. One-Click I/M Function:
9. DTC Library:
Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.
10. Print Diagnostic Report :
Step 1: Share report via Email to computer.
Step 2: Printer directly from computer.
11. One-Click Update via WiFi:
Lifetime free update, that mean you can update it forever without any annual costs.