Description:

 

Yanhua 35160 35080 Programming Emulator comes with an independent program which can adjust mileage directly.

 

Supported EEPROM:

 

M35080

M35080-3

M35080-6

M35080V6

M35080VP

080DOWQ

080DOWT

160DOWQ

160DOWT

35160WT

 

Operating Instructions:

 

1. Chip Soldering

Solder the 35XX chip on the meter to the specified location of the simulator. Please pay attention to the chip direction.

 

2. Create New Folder 

Create a new folder on your desktop. For example, named the new folder as "mileage modification"

 

3. Simulator Connection

Connect 35160/35080 Programming Emulator to computer via mini USB cable. Then a USB flash drive with named “35xxx memory” will be recognized by computer. 

 

4. Decompress Modification Tool

Open 35xxx memory USB flash disk, copy the compressed "35xx mileage modification tool.rar" file and paste to “mileage modification” folder on desktop. Decompress it to the current folder to get the setup file named "35xx mileage modification tool.exe".

 

5. Copy the original data file to the "mileage modification" folder on the desktop. According to the original car chip model, select the corresponding original data and copy it to “mileage modification” folder on the desktop. (For example: If the original car chip is 35080, choose 35080 raw data bin file; if the original car chip is 35160, choose 35160 raw data bin file)

 

6. Open the mileage modification tool

Drag the original data file to the modification tool or double-click to open the “35XX mileage modification tool”, drag the original data file into the tool interface and press Enter key to confirm.

 

7. Modify Mileage

Enter the mileage data you want to modify as prompted (Note: please enter unit after the value like XXXkm or XXXmi), then press Enter to confirm, then a new file 35xxx raw data _yyyy.bin file will be automatically generated.

 

8. Copy the modified data to the "35XX memory" USB flash drive

Open the "35XX Memory" USB flash drive, delete the 35xxx simulated data bin file of the corresponding chip (note the "simulated" data file), and then copy the 35xxx original data _yyyy.bin file generated in the "mileage modification" folder to the "35XX memory" U flash driver.

 

9. Data comparison

Unplug 35160/35080 Programming Emulator and plug it again, open the "35XX memory" USB flash driver, compare the newly-generated simulated data of the corresponding chip with the modified data in the "mileage modification" folder. If the data is the same, means operation is successful. Solder 35160/35080 Programming Emulator to car instrument chip location.

 

Notice:

 

Please save the copied raw data bin file on your computer, so that the data can be recovered when the operation is wrong. If the operation is failed, do not be nervous, unplug the USB cable and plug it again to restore normally.